INTELLI-CORE panel technology gives you the lightest product in the marketplace which is also completely waterproof inside and out. A real insulated value of R-9 for the floor and walls long with a R-15 roof gives you the best insulated trailer on the market. Easier to move, easier to clean, easier to heat/cool, giving you more time to enjoy your next adventure!
Non-Skid and Insulated Floor
The INTELLI-CORE panel used to make your floor has a textured surface that is non-skid whether it is wet or dry. It is also easy to clean, just take a pressure washer to it if needed. The interior is waterproof, so have at it. Also, with a R-9 insulation rating, you can stay comfortable with warm feet on a dry floor.
No longer do you have to make permanent decisions as to where to locate your rattle reels, rod holders, side tables, etc. The CORE Rail installed at the mid-line of the trailer and up at the ceiling allows you to hang components anywhere you want. You can quickly and easily move them from spot to spot, out of the way for storage, or change out items for different seasons giving you maximum flexibility.
Surround yourself with 360 degrees of LED lighting that eliminates shadowing and the need for hole lights entirely. As a standard feature, the lighting is also on a dimmer control so you can dial in just the right amount of light for your conditions and also allows you maximum control over your amperage draw on the battery. The diffuser lens over the lights gives a very upscale and clean look to the interior or your trailer.
Standard Electrical Package
Our standard electrical package found on all models gives you the capability you need. You get a 35 amp power center connected to a shore power plug on the exterior of the trailer. For lighting, enjoy dimmable interior and exterior perimeter LED lighting, front and rear LED work and load lights, and all LED trailer road lighting. On the interior you'll find a back lit switch panel, battery disconnect switch, USB and 12 V charge ports, volt meter, 110V outlet, and auxiliary power ran throughout the trailer so you can quickly and easily connect additional charge ports, fans, and additional accessories.
Custom Outfit Packages
With an extensive options list, you can configure your Adventure Trailer any way you like. We offer furniture options including pedestal mount boat seats, wall mount sofas, jack knife sofas, trifold sofas, and dinette and bunk bed combos to satisfy any need. Add to that our options for stereos, TVs, cooking appliances, air conditioning, and you can be set up for every occasion.
All of our cabinetry is custom designed in house and then cut on a CNC router to give you a perfect fit. We use PVC board to build our cabinets which gives you a waterproof product that is lighter weight than wood and will not rot or form mold and mildew.
Automotive Style Wire Harness
Trailer wiring may be the number one quality issue in the industry today. We solve this problem by utilizing a full production wire harness similar to what is found in your car. The harness utilizes heat shrunk connectors and is wrapped in wire loom to protect it from the surroundings. Our harnesses are built to a fully detailed wire schematic so you know where every inch of wire goes and you have full access to the wiring as we do not bury wiring in the walls.
Hybrid Wheel/Skid System
This patent pending design gives you the best of both worlds. No longer do you have to own an additional trailer to transport you skid house. No longer do you have to miss the early ice season with your wheel house. Put your lightweight tow vehicle in the trailer and at the landing, hook that to your wheel and skid house and be the first on the ice, the fastest on the ice, and the last off. Skid mode is functional with or without the running gear removed.
INTELLI-CORE panels are constructed out of marine grade and UV stabilized FRP for both the interior and exterior skins. The panel technology gives you a stronger dent resistant surface and a full walk on roof. In the even that the trailer does get damaged, it can be easily repaired at a local body shop.
Aluminum Gorilla Spaceframe
Not only do we use Military grade aluminum in our construction, we also use tubes which are taller and wider than the competition which results in a stronger and stiffer structure. On top of that, we structurally bond our INTELLI-CORE panel floor which greatly increases the strength and stiffness of the frame structure. This means less flex and fatigue on the welds which results in a much longer lifespan.
Simple Lift/Lower System
We utilize the fastest electric jack on the market to lift and lower the front end which also has multiple memory settings and an auto retract feature. We couple this with pipe mount jacks for the rear corners that use a 5/8" socket on a drill to quickly and safely lift and lower the trailer. There are no cables or straps that can break and no winch handle that can break loose. The trailer can never fall to the ground! The jacks double as stabilizer jacks for loading/unloading and store inside the trailer to keep them out of the elements.
Light up the night with full perimeter LED lighting around the exterior of your trailer. These dimmable lights allow you to easily see when you raise or lower the trailer, fish tip-ups at night, create a beacon on the lake so you can find your way back, and allows you to illuminate your campsite as well. The left and right sides are switched independently giving you even more flexibility.
Color Matched Doors
Not only do your entry and ramp doors come color matched as a standard feature, they are also constructed out of INTELLI-CORE panels meaning they are lighter weight, stronger, and better insulated than the standard RV style doors found on the other brands.
Thermal Dual Pane Windows
The windows in your trailer are dual pane RV style slider windows with a dark tint to them. We use RV style windows as they are designed to travel down bumpy roads and lake approaches without breaking. Your trailer comes with two windows standard with the window on the driver's side being an egress Exit window.